Introduction :

RE93 Electronic Reader emulator for replacing old tape readers. It can emulates most of the interfaces like FANUC, REMEX, FER, SLO-syn, JAPAXNEN etc. It also offers DNC for old NC-CNC machine With the help of DNC, PC can push NC programs to NC in block by block fashion & executes large NC code. It is generally used for machines having parallel port. This is connected in between PC & CNC machine. Program from computer can be called by RE93 keyboard and transfer towards NC machine.

Features Of RE93 Unit :
1) 16 * 2 LCD display
2) 4 * 4 Membtane type keyboard
3) Expanded Memory
4) Multiple Part Program Storage
5) Calling Program from RE93 unit
6) Easy to handle unskilled operator
7) It is micro controller based product
8) DNC connection
9) PC -CNC Direct Communication
10) Executable storage

Interface :

RE 93 has standard RS 232 port for PC communication. It has transmit and recive line and has Xon Xoff protocol. RS 422 also can be incorporated with one additional converter. RS 232 port of RE 93 is optically isolated from ground.

For reader/puncher connection RE 93 has two ports called input port and output port. Both are 25 pin D type connectors. Input port is for connecting existing reader. If reader is connected to this port, paper tape can be read and store into RE 93 memory. If puncher port from CNC is connected to this port, NC data sent by CNC to puncher port will be collected by RE 93 and store electronically. Data stored in RE 93 can be later sent to PC using RS 232 port.

RE 93 has output port for connecting to reader port of CNC or puncher. RE 93 can respond to CNC exactly as reader responds to CNC and send NC data to CNC electronically. It generates sproket signal for certification. If puncher is connected to this port RE 93 will drive puncher so that paper tape can be punched out.

RE 93 can emulate following interfaces as on the today and can be configured for any other inetrface if necessary timing diagrams are available with the customers.

1. FANUC Reader
2. Tally Reader
3. Acrared Reader
4. Gilmelti Reader
5. General Electric
6. S/O Syn Reader
7. GNT Reader
8. Remex Reader
9. FER 202 Reader
10. Facit Reader
11. GNT Puncher

Applications of RE93 :

RE93 Retrofit to FANUC 6M, 7M, AGIE, CHARMILLES, JAPAX, SEIB & MAYER, ACRAREAD, EXCELLON, DECITEK, FER, & most of the machine having parallel port, etc.
more about Applications of RE93...