 | | |
 |
| | |
General
Information
Govt. Polytechnic,
Pune commonly popular as GPP is established in 1957. It is senior and largest
institution in the higher and technical education system of state of Maharashtra,
Looking at its consistent high performance over the years, Govt.of Maharashtra
awarded academic autonom to it, in May 1994 , to march towards excellence. Recently
all the diploma programmes have been Accredited NBA and 5 programming got grade
'A' for next 5 years and one dept got 'B' grade for next 3 years.
|
Institutional
Purpose
Teaching to produce technicians
through carefully crafted diploma programmes in closer contact with industries
is the fundamental purpose of the institute. Service - integral to education -
is the institute's obligation to share the benefits of its knowledge for the public
and industry.
These two interlocking elements span all of the institutes academic
disciplines and multi-disciplinary cells making the faculty and staff committed
to providing the knowledge benefits and services with quality and effectiveness.
It aspires for national and international recognition for its initiatives and
achievements.
| Vision
"To
develop self reliant, versatile, Need driven & motivated engineers to cater
the requirements of Mankind & Economy withthe help of efficient & strategic
networking among Industries, Institutions & Research & Development Organization"
|
 | MD501
| 3D
Design & Modeling
CAD ( 60 hrs. ) |
Course Syllabus
: 3D Solid Modeling, Surface Modeling, Advance Surfacing, Assembly & Animation,
Drafting & Detailing, Project & Exam. |
| MD503 | I-deas
-Simulation
CAE-FEA ( 60 hrs. ) |
Course Syllabus : Intro.
to FEA, Typical Analysis, Model Generation, Loading & Solution, Post Processing,
Structural Analysis, Thermal Analysis. |
| MD504 | Pro-E
( 90 hrs. ) | Course
Syllabus : 2D Sketching, Part Modeling, Surfacing Assembly, Drawing &
Drafting, Introduction to Sheet metal. |
| MD507 | CIM
Technology
( 60 hrs. ) |
Course Syllabus : Operating
and programming of CNC machine tools, Operating CNC turning m/c,
Programming
Turn with Fanuc, Operating CNC milling machine, Detailing, Project & Exam,
Generaive machining. |
Elements
of a CIM Systems | | Course
Syllabus : Operation of the CIM SYSTEM
with predefined programs, Programming the CIM SYSTEM, CIM topology and communication
network, Programming of a robot. |
| MD502 | 3D
Design, Modeling & manufacturing
CAM ( 60 hrs. ) |
Course
Syllabus : 3D Solid Modeling, Surface Modeling, Advance Surfacing, Assembly
& Animation, Drafting & Detailing, Project & Exam. Generative Machining,
Volume Clear, Profile Milling, Flow line, Manual, NC Creation, Post Processor,
Turning. |
| MD508 | Auto
CAD Basic
( 60 hrs. ) |
Course
Syllabus : Introduction to ACAD, Basic sketching operations, Editing operations,
Drawing set up & customization, Advance commands in ACAD, Layers concept,
Dimensioning, Isometric drawings, Assignments & Project, Exam |
| MD509 | Auto
CAD - Advanced
( 60 hrs. ) |
Course
Syllabus : Introduction to ACAD, Basic 2D, concept, Introduction to 3D concept,
Wire frame modeling, Surface modeling, Solid modeling, Solid operations, Solid
editing, Introduction to 'Auto-LISP', Assignment & Projec & Exam. |
|
Who
should attend :
Designers, Engineers,
manufacturers who works in Product Development & manufacturers of Dies &
Moulds.
| Prerequisites
:
An understanding of basic
drawings & basic computer knowledge.
|
Career
Options/Benefit :
Person will
able to design in 3D; make 2D documentation; make assembly & it's documentation;
& tolerance Analysis. Most of the Engineering companies including MNCs needs
3D model as a basic input to product development leaving behind ample of career.
|
| For further
information please contact Mr. Shashikant (98 90 111
894) | | Batch
Timings : 10 to 2 , 2 to 6, 6 to 10 | | |
| © copyright
2000-06 Antech Micro Systems Pvt. Ltd. All rights reserved. |
| |
