HomeContact UsDownloadSupport
 
Back January. 2005

Customer success at Godrej & boyce mfg pvt ltd, Mumbai


The Godrej Toolroom is one of the largest and most sophisticated tool rooms in India. Established in 1935, they have grown to become one of the most organized and professionally managed tool room facilities capable of handling any challenge in design, manufacture and testing of any kind of tool.
They were having 13 CNC machines with FANUC 6M controls and there is no drift mode facility so that CAD CAM programs can not be run on the same in one go. Proposal for retrofitting these machines was under discussions. Cost was tune to Rs. 1.3 croes. When this was discussed with antech engineers BTR RE93 DNC was offered. Price was unbelievable almost 10 times less. Installed on single CNC and found good results. Later was installed on other machines as well saving about Rs.1.2 crores. Due to simultaneous communication all individual PCs were removed resulting further saving.
 

 Home  |   DNC   |     CADlink    |    ANACAM     |     Machine Monitoring    |   Solid-Edge   |     Resellers    |   Contact      |   Download
© copyright 2000-06 Antech Micro Systems Pvt. Ltd. All rights reserved.