|
 |
|
Fanuc
6M control does not have block by block
communication facility (Drift mode) as required by Die & Mould Industry. BTR
RE93 from Antech provides this facility on
Fanuc 6M control.
|
| |
1)
RE93 for Japax CNC Wire EDM
Japax CNC
Wire EDM is having cassette tape for Data Communication. However with RE93 NC
program generated in PC can be transmitted through RS232 port available on RE93.
RE93 in turn emulates cassette interface & transfers program to Japax NC.
|
2)
RE93 for FANUC 6M
CNC VMC/HMC
fitted with FANUC 6M controller has RS232 port for communication. However memory
for this control is limited to 32 kb. And large NC programs can not be accomodated
in CNC memory. This CNC does not have drift mode facility. RE93can provide this
facility.
|
3)
RE93 for Agie CNC Wire EDM
Old AGIE
make CNC Wire EDM has taper reader for NC Data transfer. RE93 can transfer NC
Code generated on PC to machine.
|
| |
| |
|
|
